Fence Earth Auger, Petrol Borer 52cc 2.3HP 2-Stroke Post Hole Digger+Drill Bits 4″ 6″ 8″ Bar Single Cylinder Air-Cooled System One Man Fence Earth Auger

About This Item

Description:

• The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts,
• poles, trees, shrubs etc.
• Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily for
• a wide variety of tasks.
• Ergonomically designed, it is accurate, easy to use and economical.
• Supplied with bits of 4″, 6″ & 8″, the auger can drill holes of various diameters.
• With this tool, you will be able to perform professional quality work.
• The Earth Auger has a straight through gearbox, unlike models with a side mounted engine,
• the straight through design is much more robust and less likely to shear gears.

Technical details:

• Engine: Single Cylinder, 2-stroke, air-cooled.
• Cylinder capacity : 52cc.
• Fuel mix: 25/1.
• Bits : 4″, 6″ and 8″.
• Safety: Bit Lock.
• Power:1.7W/8500rpm
• Carburetor with pump.
• Easy starting system (cord starter). Centrifugal clutch.
• Change bits quickly and easily.
• Weight : 11.6 Kg. (without bit).

Package Include:

• 3 bits: 4″, 6″ and 8″.
• Extension Bar: 12″.
• Fuel Mixing Bottle.
• Tool kit for assembly.

• LABOR-SAVING – Features a 52cc auger engine with Rotational Speed speed up to 8500RPM with a power 1.7W/8500rpm. Compared to the traditional manual digging tool, Eapmic gasoline powered post hole digger is equipped with an air-cooled two-stroke engine with low failure rate and easy maintenance, more labor-saving and efficient, reducing your outdoor work load. It is of light weight and can be used by one or two people.
• EASY TO ASSAMBLE AND USE – According to the instructions contained in the package, you can easily install the digging machine. After a manual recoil start, the auger head of 52cc can start working immediately.
• EFFECIENT BLADE DESIGN – 4” 6” & 8” drill bits are makes your digging more effecient. Even the toughest soil can be easily drilled through. The blade spacing is set to minimize the power required for drilling and to maximize the amount of loose soil removed from the holes. Ideal for installing wooden decorative fence or chain link fence, refitting deck and patio, planting trees or shrubs, drilling flag holes etc.
• RUGGED DRILL BIT – With drill bit of black powder coated for rust and corrosion resistant protection. The drill bit is heavily measured to withstand bending and torque loads. Spiral blades increase structural strength.
• USER-FRIENDLY DESIGN – The ergonomic butterfly handles help to keep balance when in use.
  

Specifications